Tips to help clean laminate flooring after renovation

What is laminate flooring? It is a hard floor covering found in many modern apartments or houses. Now many people use it. But after renovation, it can be quite difficult to clean laminate floors.

How to clean laminate flooring after renovation?

Before cleaning laminate flooring after renovation, you need to select the appropriate inventory. When cleaning the floor, do not use old rags, T-shirts or any unknown means. Do not allow the coating to be scratched. So what's best for cleaning laminate flooring after renovation?

Microfiber is the best option. It absorbs moisture well, cleans the floor and is soft enough. You can also use cotton or woolen rags.

Laminate can be washed by hand or with a mop. A mop is best used with a spin. To avoid leaving a lot of water on the floor.

Recommended cleaning products for laminate flooring after renovation

After renovation, there are several tools that are highly recommended. TOP 5 cleaning products for laminate flooring after renovation:

  • Cooking salt. "Flexible" product, suitable for cleaning any construction dust. Dilute in cool water. Half a glass of table salt is enough.
  • Domestos. It is very important not to overexpose this product on the surface. The composition is suitable for wet cleaning when there is no more construction dust, paint and other dirt.
  • Special tools. Household chemical stores are now full of all sorts of different products. You should ask your sellers or specialists what composition is suitable for cleaning laminate flooring after repair.
  • Vegetable oil. Able to remove all the smallest traces of construction dust. It is recommended to dilute in warm water. 2-3 tablespoons of vegetable oil.
  • Kerosene. It is also able to effectively clean various types of dirt. You need to dilute no more than half a glass of kerosene in a bucket of warm water.

For routine cleaning of laminate flooring under normal conditions, plain water is fine.

How to remove dirt and stains from laminate flooring after renovation?

After a renovation, there is usually a lot of construction dust, stains of primer, glue or lime. It is recommended to consistently clean the floor from dirt. Step-by-step action plan:

  • Garbage collection and vacuum cleaner. First, you need to remove all excess garbage. Then the floor should be vacuumed so that no building dust and dried building materials remain.
  • Remove paint. It is best to clean the paint with special products. In the store, experts can advise which one is needed. Apply a special product to a cloth or cotton swab. We wipe the place with paint. After all that has been done, it is recommended to wipe this area of ​​the floor with a slightly damp cloth.
  • We wash off the glue, cement, primer. Moisten the contaminated area with a special product. Or a window cleaner spray will do. After moistening this area, it remains to wipe with a damp cloth.
  • Remove the remaining dirt. A special product for cleaning the floor, in this case laminate, is also suitable. You just need to clean the floor. And if streaks remain, then you need to wipe the surface again with a clean cloth.

Tips to help clean laminate flooring after renovation

Dry cleaning the sofa at home allows you to save money on professional services. It is important to figure out how to properly dry clean your sofa at home, and what tools to use for this. Cleaning can be dry or wet, depending on the severity of the dirt.

Dry cleaning methods

Each stain is cleaned individually. For example, dry cleaning is carried out regularly. It is enough for her to knock out the dust or walk on the surface of the furniture with a vacuum cleaner.

  • Beating can be done with a plastic carpet beater. This must be done carefully so as not to damage the surface.
  • For another option, take an old sheet. Moisten it and spread it on the furniture. After that, they once again pass through it with a beater. Rinse with water and shake out again. The procedure is carried out until the sheet is clean.
  • You can add more color to the furniture. To do this, the sofa is sprayed with a solution of vinegar dissolved in a liter of water.
  • Another way is to moisten the gauze and wind it around the vacuum cleaner hose. As soon as the piece of gauze gets dirty, it is washed and the procedure is repeated.

These methods are suitable for furniture with rare upholstery, such as silk. You can clean the sofa with powder. To do this:

  • the sofa is cleaned of dust;
  • the powder is applied with a brush;
  • is left on for a while;
  • cleaned with a vacuum cleaner.

These methods help you dry-clean the sofa yourself.

Wet Methods

How to wet dry-clean a sofa at home? One easy way is to mix soap and water. Better to use liquid soap. This product will help remove light grease. But not suitable for cleansing a greasy stain.

Cotton cloth is moistened in this solution and dirt is wiped off in this way. The excess is removed with a dry napkin and wiped dry. Wipe in one direction only, not in a circle. This can lead to streaks.

There is a special furniture cleaner in stores. It is recommended to use it like this:

How can you clean your laminate flooring after renovation. How to clean up dirt and stains after renovation. Mechanical removal options. What not to do. Precautions and Recommendations.

Ceramic tiles are the most popular building material. They can decorate the bathroom and more. Nowadays, tiles are present in almost every apartment. She takes a powerful blow. Installed in places of high humidity. Getting in dirt and grease is not a difficult task for her. But even such a resistant material will not always be in excellent and working condition. It should be looked after and treated with cleaning agents. But how to clean the tiles after repairs is worth figuring out.

How to remove different types of dirt from tiles?

Before you start cleaning dirt from a plane made of tile material, it is worth getting to know the types of dirt.

  • grease and bits of food;
  • limescale;
  • soapy deposits;
  • dirty stains;
  • seams between tiles that are darkened.

Before starting to clean the tiles after repairs, it is worth preparing the necessary equipment:

  • Brush. Soft yet firm. To clean stubborn dirt. Hard brushes can damage the tile surface.
  • Soft sponge. It is used for applying chemicals and cleaning seams.
  • Toothbrush. Clean seams.
  • Rag. It is convenient for cleaning up the excess after cleaning the tiles.

Grease removal

Small particles of fat are removed with detergents or soda solutions. How to use the tile cleaner after renovation:

  • To make a soda solution, you need 4 tbsp. ... soda per 1 liter of water
  • Apply to the tiles.
  • Leave for some 10 minutes.
  • Then wash off with warm water.

If the dirt is not washed away, it is worth using a detergent for tiles. Before washing the tiles, the room where the tiles are installed is heated. You can draw hot water or try to warm it up with a hairdryer. The dirt will recede more easily.

Soap and limescale

Plumbing cleaners are the best solution for these problems. As well as chemical compounds that contain chlorine. Do not overdo it with these products, otherwise the surface of the tile will deteriorate. It wears out due to the acids contained in the composition of the funds.

At the time, decorating premises with chalk and lime was the only available way. Having started repairs in an apartment or house of an old building, the question arises of how to quickly clean the ceiling from whitewash. A large number of materials for cosmetic repairs are produced. But no one can resist if it is not effective to clean the whitewash from the ceiling.

All About Whitewashing Paste Removal

Whitewashing paste is a mixture of lime or chalk and water. The composition was easily prepared, easily applied with a special brush, but it was distinguished by its fragility. Over time, it crumbles, spots appear due to water leakage, the color becomes yellow. It was necessary to renew the whitewash every year. For this reason, the chalk layer can be impressive.

Experiments on wallpapering whitewashed surfaces were not rare, but they did not differ in effectiveness. If they could be glued, then they moved away from the surface along with the chalky whitewash.

Cleaning the whitewash from the ceiling in the bathroom is necessary not only to prepare the surface for subsequent work, but also for health reasons. Due to dampness and leaks, a fungus appears, which must be eliminated before it spreads to the entire room.

Preparing to whitewash the ceiling

Personal protective equipment is also required for cleaning the surfaces of the room. You will need:

  • glasses ;
  • respirator ;
  • headgear;
  • gloves;
  • plastic wrap;
  • cardboard;
  • scotch tape.

If you don't have a respirator, you can make a mask from a cloth or scarf, but always soaked in water so that small dust particles do not pass through the cloth.

Before cleaning the ceiling from the old whitewash, you need to prepare:

  • remove curtains from windows;
  • remove furniture;
  • remove lamps and chandeliers.

Fully completed renovation - a delight to the eyes. Everything shines, shines, and new and untouched surfaces delight the eye. However, over time, the surfaces fade, turn yellow, become covered with soot, and lose grace. This is all fixable by cleaning plastic windows, if you wish.

Types of pollution

Windows are one of the most noticeable elements of any apartment or house. And their appearance is striking. Wood and plastic differ in their care properties. Despite the high indicators of resistance of plastic to external influences, it can be subject to persistent dirt and staining. Many manufacturers, wanting to save money, use low-quality plastic in their production. As a result, the plastic deteriorates and becomes dirty faster. How to clean plastic windows and keep them looking perfect? ​​

Unfortunately, they get dirty quickly, even at the time of installation. It is rather laborious to bring them back to their original form. However, most plastic window cleaners are found in every home.

  • polyurethane foam;
  • grease;
  • fingerprints;
  • soot;
  • scotch tape;
  • paints;
  • cement;
  • yellow bloom.

Cleaning plastic windows is a fairly regular process and takes a lot of time.

How to wash plastic windows?

How to clean plastic windows? How to remove each type of dirt:

  • Polyurethane foam. Most often appears when installing windows. Removal is done in two stages. First, a scraper removes the maximum layer of foam from the glass. Next, using a solvent, remove the remaining foam.
  • Grease, fingerprints and grime. Everything is quite simple here - a window cleaner. Use a cloth (ideally microfiber). Apply liquid from a spray bottle to glass, then rinse thoroughly with a rag.
  • Scotch tape. Alcohol or vegetable oil. Attention - these materials are aggressive when applied to PVC. So, before using, you need to check on an inconspicuous area of ​​the window. Use a cloth (preferably microfiber) for application and cleaning.
  • Paints. Silicate office glue can help with such contamination. Apply to the contaminated area, then rinse with a sponge.
  • Cement. Complex kind of pollution. Soak with soapy water, then remove.
  • Yellow bloom. It occurs most often and requires more attention.
  • Mold and mildew. An unpleasant consequence of improper installation and use of windows. It is necessary to regularly ventilate the room, since the obstruction of the passage of oxygen affects the development of the fungus. You can clean it with a scraper, removing as much mold as possible. After that, treat with a chlorine-containing solution. The main thing is to be careful and not spoil the slope. After removing the mold, it is best to waterproof it to avoid reoccurrence.
  • Pens and markers. Another type of pollution, most often appears in the house where there are children. It is necessary to delete based on what the manufacturer of this stationery used. Oil base - oil, alcohol - alcohol, water - soap solution.
  • Putty and plaster. Remove immediately before it is dry. Use regular paper towels.
  • Sealant. Remove carefully enough, waiting for drying and picking up with a sharp object.

Other types of stains may require more than one type of remover. Home remedies and store formulations can be used to remove stains and dirt. How to clean plastic windows from yellowness is presented below.

How to wash double-glazed windows?

The most common stain on windows is yellow bloom. Appears from soot, smoking, low-quality plastic, weather conditions. The tools are quite different, their use will help to make the windows look new:

  • soap solution;
  • alcohol;
  • ammonia;
  • bleach;
  • hydrogen peroxide;
  • vinegar solution 8: 1;
  • washing powder;
  • PVC paste;
  • baking soda;
  • special gels.