Secrets of cleaning a chimney in a private house

Owning a private house obliges a person to be more attentive to the living space. Also gradually learn to carry out minor repair or cleaning work. Cleaning a chimney in a private house is a serious event, which will determine the level of smoke output when burning a stove or fireplace.

Reasons for chimney clogging

For many modern residents of a metropolis, owning a private house, be it a summer residence or a full-fledged residential building, is a sign of wealth and success. In this regard, you should know how to clean the chimney pipe in a private house according to all the rules. In turn, this can complicate the life of the household.

Before removing dirt from the pipe lumen, you should know what causes the accumulation of soot and other contaminants:

Clogging of the lumen with residues of combustion products. Most often occurs when burning in a fireplace or stove, not dried firewood. In the process of using this type of fuel, acids are formed, increasing the process of depositing carbon deposits on the walls of the chimney. Gradually, this leads to a narrowing of the lumen and a deterioration in the outflow of furnace gases.
Use of materials not intended for heating domestic stoves. These include plywood and its waste, wood-based panels, as well as chipboard. In this case, the increase in contamination will be associated with the resins contained in such materials.
Use household waste as fuel. Most often, such fuel contains chemical compounds in addition to resins. This not only leads to rapid clogging, but also poses a danger to the health of the inhabitants of the house.
Pine or spruce firewood. These types of wood are resinous. This causes an increase in the sediment of a variety of contaminants.
Low chimney temperature. Under conditions of insufficient heating of the pipe, such a phenomenon as dew point may occur. To combat this condition, it is necessary to ensure sufficient insulation of the chimney.
The presence of pipe bends. In some cases, it is impossible to run the chimney vertically and you have to use the "knee" when laying. In this case, pipe bends are formed, on which soot and resins accumulate more quickly than in the main pipe.
Roughness of any format on the inside of the pipe. On smooth surfaces, dirt settles more slowly than on rough walls.

As a result of a clogged chimney, people living in the house can face a number of unpleasant moments.

Chimney cleaning methods

When deciding how to clean the chimney in the house, you should decide which method will be used and the means for it are advised to use. For example, you can use both household and specialized chemicals. Plain water or even metal tools can be used for cleaning. All this is aimed at accelerating the process of eliminating dirt from the lumen, as well as facilitating the very task for the owner of the house.

Do-it-yourself chimney cleaning in a private house can be:

Mechanical cleaning. It is characterized by the use of additional metal fixtures. Special weighted brushes or weights are attached to the rope and lowered into the pipe. In some cases, a wire rope or gooseneck can be used to "punch" dirt through a particularly narrow passage. An example of how to clean a chimney in a stove of a private house using mechanics can be seen in fairy-tale films where a chimney sweep is involved.
Cleaning the chimney in a private house with water. It is considered one of the available methods.
Chemical cleaning. The method supports the use of specialized chemicals to remove dirt and soot from the chimney. When using it, you must remember about safety measures while working with chemicals.
Biological techniques for cleaning the lumen of the pipe.
Folk ways. In every family there are one or two ways "from the people" that help to deal with the presence of pollution in the chimney.

The choice of certain means and methods of cleaning work will depend on the wishes of the owner of the house, and on the degree and type of pollution.

Mechanical cleaning

This is the cleaning of the chimney or chimney of the fireplace with the help of force and metal devices. Chimney sweep heroes from old movies are an example of such cleaning work. In them, chimney sweeps used special metal brushes, which were attached to a long rope or cable. A flexible cable can also be used to clear tight spots.

Secrets of cleaning a chimney in a private house

The basement, along with the foundation, is an important component of any building. For this reason, finishing it is a serious process that needs to be given a lot of attention. As a rule, the basement is finished with natural stone. However, it has a high price and is not available in large quantities to every home owner.

Now, finishing the base with natural stone has an excellent alternative - an artificial analogue. So, it is much cheaper, but at the same time it is not inferior to natural in terms of operational properties.

Next, we propose to consider how to properly clad the basement of a house with artificial stone.

Basic rules for choosing an artificial stone for a base

There are no special requirements for colors or textures. In general, it is worth giving preference to two materials that are more or less combined in shades. Thanks to this trick, the impression will be created that the basement is lined with natural stone, because in nature there are no rocks completely similar to each other.

It is not recommended to use light shades because the base is the most branded part of the wall.

When choosing a material for finishing a basement with artificial stone, it is recommended to pay attention to such parameters as:

color ;
surface quality;
visible damage;
strength;
aggregate fraction;
uniformity;
temperature resistance;
cost;
hydrophobic treatment.

Attention! Drainage gutters must be included in the kit. If there are none or there are, but with a defect, after sub-zero temperatures, the elements may lag behind the base.