How to make a cardboard ship with sails

Our warehouses of tires in Russia:

Yekaterinburg, Moscow, St. Petersburg, Podolsk, Voronezh, Irkutsk, Krasnodar, Novosibirsk

DIY underwater camera for winter fishing, assembly instructions

Such cameras have appeared quite recently, and managed to find their buyer in the person of amateurs, both winter and summer fishing. Underwater fishing becomes more interesting and engaging. Naturally, not everyone can buy a camcorder for underwater shooting, but making it yourself is not a problem.

Is it worth paying for an underwater camera for winter fishing?

Since this product appeared on the market not so long ago, its price is quite high. The high cost of any fishing tackle pushes anglers to find simple and cheap solutions. The same can be said for the underwater ice fishing camera.

These people (fishermen) are considered to be quite enterprising people, able to find a way out of any seemingly most hopeless situation. They began to make similar designs from more affordable and cheaper elements. Such designs are in no way inferior in their functionality to industrial designs, but they are ten times cheaper.

DIY underwater camera for winter fishing

As practice shows, there is nothing complicated about it. The main thing is the presence of all the main components, without which the camcorder will not work underwater. To build it, you need the following components:

  • Battery from the car.
  • Sealed box.
  • Extension cable.
  • Inverter power supply.
  • Miniature TV or modern camcorder.
  • Lead weight.
  • Diodes for illumination (ultraviolet).
  • Quality glue.
  • Sealed material.
  • Plastic container.
  • Insulating tape.

The correct choice of some components is also important. For example:

  • Choose only small camcorders. They will prove to be the most practical for the given conditions. At the same time, one should not forget about how high-quality her image is.
  • The underwater box, where the camera will be located, must be so tight that a drop of water cannot get inside. In addition, its dimensions must match the dimensions of the device.

Correct selection of a video camera

DIY bouquets step by step photo

Main topic

official statement

"gas pipeline is required"

weather forecast

Video

Simferopol Airport

Ideas of excellence

initial training

great patriotic

global approach

new bill

Nord Stream -

in your opinion

Main topic

official statement

"gas pipeline is required"

weather forecast

Video

Simferopol Airport

Ideas of excellence

initial training

great patriotic

global approach

new bill

How to make a cardboard ship with sails. How to fold a paper boat

Traditionally, a boat is considered a boy's toy, but they will not give up such fun as launching paper boats in streams, especially if they can make them with their own hands and decorate to their taste! And if the season does not allow, then you can play in the bathroom. Let's consider step by step how to fold a boat from a sheet of paper using the origami technique.

To make such a craft, you need not a square sheet, as for many origami, but a rectangular one. A4 paper is ideal (preferably thick paper - for example, sheets for a printer or color double-sided for children's creativity).

How to make a boat out of paper with your own hands - step-by-step instructions with a photo:

Helpful hint: so that the figurine will serve for a long time and not become disposable, first dip it in melted paraffin. This will make it waterproof. An origami boat can also be made from pages of glossy magazines.

If your kid is bored with toys, just show him how to make a paper boat. Children study the process with interest, and then work on its details for a long time, equipping the origami ship with plasticine passengers, paper tools, a straw flagpole or an improvised sail. Launching paper boats is even more fun than folding. Adults do it with the same passion as toddlers. Why not make folding and launching your paper fleet a family hobby?

Basic Option

The first scheme is well known. However, not everyone knows how to make a simple boat out of paper using it. But everything is simple here - you only need a sheet of A4 or any other format (rectangle, but not a square) and a little patience. You can use colored paper, for example, green - you get a warship, which is often decorated with red stars (applique). Note that the single-sided sheets are folded in color to maximize the color outside the ship. Step by step instructions and fig. 1 will help you understand the intricacies of the process. So let's get started:

  • Place the rectangular sheet vertically in front of you, and then fold it in half from top to bottom;
  • Now bend the workpiece vertically, aligning its left side with the right, squeeze the bend ;
  • Go back one step - in front of you is again a horizontal half-folded sheet (fold at the top, free edges at the bottom);
  • Now bend the upper corners towards you, bringing them to one point and equal edges along the central edge of the workpiece (see how to do it in Fig. 1);
  • Turn up the "walking" lower sides on each side and give the workpiece a triangle shape, tucking the protruding corners behind each other;
  • Open your triangle from below, bringing its sharp corners to each other - you will already get a square (see figure);
  • The workpiece will have only 2 free corners, each of which must be wrapped to the opposite vertex with each side;
  • Reopen the resulting triangle from below, turning it into a regular square (as in step 6);
  • Spread the "walking" corners to the sides, releasing the mast, straighten the toy - a paper boat with a mast-cone is ready.

We looked at how to make a paper boat in stages, and you just have to decorate and stylize the toy according to your idea: as a passenger liner or a military battleship - whatever you want. Such a craft perfectly floats and stays on the water for a long time. To prevent the toy from getting wet and delight the baby even longer, paint it on the outside with acrylic paints or use shiny glossy sheets of paper.

Sailboat Option

Have you studied the first scheme and mastered this technique in practice? Then it's time to diversify origami skills and fold a beautiful sailboat, which also requires nothing but a piece of paper. It is important to take into account that the sailboat is folded a little differently - unlike the first scheme, here the colored side of the sheet remains outside, that is, the sheet must be put "face down" and the draft side facing you. So to the point:

  • Lay the rectangular sheet in front of you vertically and fold it at an angle, bringing together the left edge of the sheet with the upper one;
  • Cut the workpiece along the revealed lower edge with scissors - you need a correct square sheet, the cut off edge will not be useful to you;
  • "Straighten" the square by folding it in half from left to right, and from top to bottom, and then diagonally;
  • Sticking to fig. 2, fold the “sashes” of the sheet towards the center and, according to the ruled, fold the “boats” on both sides, pressing the workpiece in the center and opening it from the inside with your free hand along the edges;
  • Turning the resulting adjacent boats “face down”, fold the workpiece diagonally, turning the elements perpendicular to each other (see Fig. 2);
  • Press the folds and straighten the toy - the boat with the sail is ready to make its first voyage.